Career Overlap Occupation record Edition 1 · ESCO v1.2.1
RecordOccupation

Where a oxy fuel burning machine operator can go next

5 destinations recorded, ranked by how much of the target role a oxy fuel burning machine operator already meets. The closer to the top of Table 1, the less there is to learn.

Oxy fuel burning machine operators set up and tend machines designed to cut, or rather burn off, excess material from the metal workpiece using a torch that heats the metal workpiece to its kindling temperature and subsequently burns it into a metal oxide upon its reaction with an emitted stream of oxygen, flowing out of the workpiece's created kerf as slag.

Craft and related trades workers 47 skills on file 5 career moves 5 above 60% overlap Closest: stamping press operator, 77%

stamping press operator 77% covered spark erosion machine operator 76% covered metal sawing machine operator 73% covered punch press operator 73% covered riveter 72% covered oxy fuel burning machine … You are here
Fig. 2 — the 5 nearest destinations from oxy fuel burning machine operator. Distance from the centre is how much retraining the move takes; the figure on each is how much of that role a oxy fuel burning machine operator already covers. All 5 are listed in the tables below.
  • 70% and above · short step
  • 50 to 70% · real move
  • Below 50% · substantial retraining
Table 1

Table 1 · Within reach

Index

Look up another occupation

oxy fuel burning machine operator is filed under Craft and related trades workers, ISCO major group 7. The full index lists all ten groups.

Note

How these figures were compiled

Coverage is the share of the target role’s weighted skill requirement a oxy fuel burning machine operator already meets, counting required skills in full and supplementary ones at 0.35. It is directional: the figure for the reverse move differs. Every entry above opens the full comparison for that move: what carries over, what is missing, and where to start. The full method.